BSD system with Buck mirrors compatible with Harley Davidson Street 500/750
$649.00
Out of Stock
SKU: 100162019288603
BSD system with Buck mirrors fit for Harley-Davidson Street 500/750, sold as a pair.
Description
blind spot bsd
Blind spot detection has been available on cars for a number of years. Now KiWAV presents the future of motorcycle safety product -- BSD system for motorcycle. Compatible with Harley Davidson Street series.Compatible Motorcycle Models
(Compatibility doesn't ensure suitability. Please verify the mirror measurements.) (Contact us with newest models not listed.)Harley-Davidson
- Street 500 XG500 (2014-2020)
- Street 750 XG750 (2014-2020)
Measurement
*Please allow ±3% measuring deviation due to manual measurement.
SPEC
- Features
- A revolutionary safety product to monitor the blind spots with advanced radar sensors while riding your motorcycle. Modern cars now have this technology and it only makes sense that your motorcycle does too.
- A built-in LED indicator on both side of rear-view mirrors. It signals you when there is traffic coming into your blind spots. This will increase rider awareness to surrounding traffic conditions.
- With the Magazi BSD system, you can ride with more confidence and safety. The warning zone of the system covers left and right adjacent lanes with up to 30 ft range.
- BSD is automatically activated when the motorcycle is started.
- Easy installation - most motorcycles can be equipped in under an hour, two radar sensors mounted to the license plate frame. Power for the system is drawn from the bike's battery. Then, indicators that light up are built-in the mirror.
- Swivel adjustable ball joint, find the best rear view angle and ready to go.
- Stylish designs for your custom applications.
- Wider vision with convex lens.
- Material
Mirror Housing: reinforced ABS
Mirror Stem: Aluminum
BSD radar body: Hi-impact plastic housing
BSD radar bracket: Aluminum - Color
Black - BSD SPEC
Storage temperature: -40°C ~ +90°C
Operating temperature: -40°C ~ +80°C
Input Voltage Range: 9V – 16V, 12V (Typical)
Current Consumption: <1050mA ± @12V
Dust & waterproof compliant: IP67
Specifications: ISO 16750
Radiation Regulations: FCC/NCC
- Glass
Chrome convex lens - Weight
n.w.: 1302 g./ 2.86 lbs. (pair),
g.w.: 1600 g./ 3.52 lbs. (total package, packing inclusive) - Package
A pair of mirrors (Left hand / Right hand),
BSD control unit x1, radar x a pair,
5/16"-24 bolt x 2 PCS, bolt cap x2,
bracket for radar (L type) x 2, bracket for radar (straight type) x 2,
wire harness set x 4, zip ties, quick connector x4
- Compatibility
XG Street 500 2015-
XG Street 750 2015-
*These mirrors do not fit a Street Rod 750 (XG750A).
For Street Rod 750 (XG750A), please check our bar end mirror selections.
If you wish for a perch mount style mirror for Street Rod 750 (XG750A), you would need to customize the mount. *Please must check the NOTES below.
Our BSD system is NOT RECOMMENDED if your motorcycle has:
1. The exhaust placed too close to the license plate, the heat from exhaust gases will damage the radar sensor.
2. The license plate is not located directly behind the motorcycle.
3. The distance from the ground to the license plate is lower than 50 cm (19.68 inch) or higher than 90 cm (35.43 inch).
4. There is no space for the radar sensor on the both sides of the license plate. (you can download the template to measure and find out.)
1. The exhaust placed too close to the license plate, the heat from exhaust gases will damage the radar sensor.
2. The license plate is not located directly behind the motorcycle.
3. The distance from the ground to the license plate is lower than 50 cm (19.68 inch) or higher than 90 cm (35.43 inch).
4. There is no space for the radar sensor on the both sides of the license plate. (you can download the template to measure and find out.)
Video
There are yet no reviews for this product.
Please log in to write a review. Log in
Related Products
