This guide covers the installation of Magazi motorcycle fog light mounting brackets.
Quick answer: Position the mounting bracket at the intended mounting point, loosely assemble the hardware, set the bracket and fog light to the desired position, then secure the hardware after confirming clearance and alignment.
The exact mounting position and hardware arrangement may vary depending on the motorcycle and the fog light setup.
How to Install Motorcycle Fog Light Mounting Brackets
1. Choose the Mounting Position
Before tightening the bracket, determine where the fog light will be positioned on the motorcycle.
Check that the selected location provides enough space for the bracket and light without interfering with the motorcycle's controls, suspension, bodywork, cables, hoses, or other components.
2. Position the Mounting Bracket
Place the bracket at the intended mounting point and assemble the supplied mounting hardware loosely.
Do not fully tighten the bracket yet. Leaving the hardware slightly loose makes it easier to adjust the position and angle before final installation.
3. Install and Position the Fog Light
Attach the fog light to the bracket according to the light's mounting arrangement.
Adjust the bracket and light until they are positioned correctly and symmetrically, if installing a pair.
4. Check Clearance
Before final tightening, make sure the bracket and fog light have adequate clearance from nearby motorcycle components.
Turn the handlebars fully left and right and check the surrounding area. Also consider suspension movement and any cables or hoses near the mounting location.
5. Secure the Mounting Hardware
Once the bracket and fog light are correctly positioned, tighten the mounting hardware securely.
After tightening, confirm that the bracket cannot rotate or shift easily by hand.
6. Perform a Final Check
- Confirm that the mounting bracket is secure.
- Check that the fog light remains in the intended position.
- Verify clearance from controls, cables, hoses, suspension, and bodywork.
- Make sure no wiring is stretched, pinched, or routed against sharp edges.
- Recheck the light position after the first ride.
Fog Light Bracket Installation Video
Watch the KiWAV installation video below for a demonstration of the mounting process:
Watch the motorcycle fog light bracket installation video
