Flash LED mirrors

0 Rating

$144.40

In Stock

SKU: PARENT-05-8008

Flash LED motorcycle mirrors, available in multiple fitments, sold individually.

To view more product information (more photos, specification, and dimension), please choose a fitment above.

Beautiful addition to the bike. Definitely makes a statement-- it just looks good.
This forged and satin black mirror combines a traditional swept shape with a contemporary addition - forward facing auxiliary lighting: running and turn signal light. Flash LED Motorcycle mirror turn signal, driving light, in the daylight, at night, in total darkness

Flash LED Motorcycle mirror turn signal, driving light, in the daylight, at night, in total darkness

How to install the mirrors on Harley?

This guide covers the basic installation of KiWAV stem-mounted mirrors on Harley-Davidson motorcycles. Some LED mirror models include additional wiring hardware; those steps apply only when your mirror has integrated LED lighting.

Quick answer: Remove the original mirror, retain the original internal tooth lock washer, install the new mirror stem through the hand control assembly, add the required washers and mounting hardware, then tighten to 8–12 ft-lb (10.8–16.3 Nm).

How to Install Motorcycle Mirrors on a Harley-Davidson

Remove the original mirror and mounting nut. Retain the original internal tooth lock washer.
Install a flat washer on top of the hand control assembly. This helps stabilize the mirror stem.
Install the new mirror stem through the hand control assembly.
If your mirror has integrated LED wiring: route the mirror power lead through the supplied ground-wire ring terminal, then install the ring terminal onto the mirror stem as shown below.
For LED mirror installations: route the power lead through the wire guard and install the wire guard onto the mirror stem.
Install the lower flat washer.
Install the acorn nut or supplied mounting nut onto the mirror stem.
Tighten to 8–12 ft-lb (10.8–16.3 Nm). Do not over-tighten.
Check the mirror position and adjust if necessary.

Important for LED Mirrors: Protect the Wiring

If your mirror has integrated LED wiring, make sure the wire exiting the mirror stem is correctly positioned in the wire guard so it cannot be pinched or crushed by the mounting hardware.

Before final tightening, check that the wire is not trapped between the washers, nut, hand control assembly, or other mounting components.

Harley-Davidson motorcycle mirror installation with LED wire guard

Installing KiWAV Axe Mirrors?

The KiWAV Axe series has its own product-specific installation instructions. See our KiWAV Axe Mirror Installation Guide for Harley-Davidson for the correct washer placement, torque specification, and LED wire routing.

Before Riding

Confirm that the mirror is securely mounted.
Adjust both mirrors for a clear rearward view.
Turn the handlebars through their normal range and check clearance.
If the mirror has LED lighting, confirm that the wiring is not pinched, stretched, or sharply bent.
Test any integrated lighting before riding.