LED neat stem mirrors Lucifer with sequential effect black compatible with Harley Davidson

0 Rating
$179.00
In Stock
SKU: 100110319005503
Fitment Sold in Units
Visualize it right away
Printable 1:1 actual size. Print and compare before purchase.
Magazi matt black with two-tone LED neat stem rear view motorcycle mirrors Lucifer is E-mark approved. Sealed LED module with IP67 dust & waterproof Compliant. The mirror housing is made out of ABS plastic and the stem is made of aluminum 1 joint(s) make it fairly adjustable, diamond shape chrome convex lens gives a wide and clear view.

Sealed LED module with IP67 dust & waterproof compliant.

→ What does IP67 waterproof rating mean?

IP67: Ingress protection, Solid particle protection, Liquid ingress protection

IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx7, the second-highest water resistance rating, means this product can withstand immersion in water up to one meter (3.3 feet) for 30 minutes, tested in laboratory conditions.

Code Effective against Description
6 Dust tight No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.

Code Protection against Test duration Description
7 Immersion, up to 1 m depth 30 mins Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins
Lucifer LED Motorcycle mirror turn signal, driving light, in the daylight, at night, in total darkness

How to install the mirrors on Harley?

  1. Remove the old mirror and nut. Retain the original internal tooth lock-washer.
  2. Install flat washer (1) on top of hand control assembly to stabilize mirror stem.
  3. Install new mirror stem through hand control assembly.
  4. Slide mirror power led wire (gray) through ground wire ring terminal (2) then install ring terminal on mirror stem.
  5. Slide mirror power lead wire (gray) through wire guard (3), then install wire guard on mirror stem.
  6. Install flat washer (4) from kit on mirror stem.
  7. Install acorn nut (5) on mirror stem.
  8. Tighten to 8-12 ft-lbs (10.8-16.3 Nm). Do not over-tighten.
  9. Check mirror adjustment and reposition if necessary.
NOTE:
Be sure wire exiting mirror stem is positioned in wire guard so it does not get crushed by hardware.

 

KiWAV FLASH LED turn signal mirrors chrome for Harley Davidson     KiWAV Axe led turn signal black motorcycle mirrors for Harley Davidson     Chrome rear view mirrors Palm 5/16 inch EMARK for Harley davidson

More mirrors for Harley Davidson >>

  • Features
    1. Two-tone color LED lights, various combinations of driving and indicator lights set up.
    2. Turn signal light up in sequence, from the inside outwards.
    3. Sealed LED module with IP67 dust & waterproof compliant.
    4. Stylish designs for your custom applications.
    5. Wider vision with convex lens and E-mark approved.
    6. Easy installation.
  • Material
    Mirror Housing: ABS plastic
    Mirror Stem: Steel
  • Shape
    Diamond
  • Glass
    Chrome convex lens
  • Weight
    n.w.: 780 g./ 1.76 lbs. (pair),
    g.w.: 1060 g./ 2.33 lbs. (total package, packing inclusive)
  • Color
    Mirror plate: Matte black
    LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W)
  • Adjustment
    Fairly adjustable
  • Wire Length
    620mm / 24inch
  • Package
    A pair of mirrors (Left hand / Right hand),
    10mmto 5/16"-24 adapter x 2 PCS
  • Compatibility
    5/16": Compatible for most Harley Davidson, except '21 later Revolution® Max engine-equipped models, Nightster, Pan America, etc... and XG street models
    Compatible for BMW R18 series models.
  • Connect to the Turn Signal

    ♦ There is no need to replace the relay when using this product with exisiting blinkers.
    ♦ Relay is needed when using this product as the only turn signal.
    ♦ Minor modification might be required depending on motorcycles.

    Check the wiring of the vehicle on the manufacturer service manual, and connect the turn signal wiring with the attached electro tap.
    Also, please wire the position line (white) of this product to the accessory power supply of each vehicle.

    In order to use this product safely please understand and work on the followings:
  1. This is only suitable for skilled users, others please find the nearest dealers.
  2. For removal / installation of genuine parts and tightening of bolts / nuts, please be sure to perform based on the manufacturer's issued service manual.
  3. Please stop using it immediately if any faults happen.
  4. We are making every effort to manufacture and making sure its quality, but please do not install if there is any incompleteness in the item if any.
  5. Warranty is voided if any of the above are not followed.
KiWAV, kiwavMirror, kiwavmotor, motorcycle, Lucifer, LuciferLED, Lucifer-FI, LuciferLED-FI, LuciferHarley LuciferHarley-FI LED, naked, black, mat 5/16inch, sequential LuciferFISQN

*Please allow measuring deviation due to manual measurement.

Measurement of KiWAV motorcycle mirrors Lucifer LED neat stem Metric Harley Davidson

There are yet no reviews for this product.

Please log in to write a review. Log in