LED round tail light with silver mounting bracket

0 Rating
$72.80
In Stock
SKU: 991967723321118
Bracket Color Nuts

Sealed LED module with IP66 dust & waterproof compliant.

→ What does IP66 waterproof rating mean?

IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx6, the third-highest water resistance rating, means this product can withstand powerful water jets up to 3 mins from a distance of 3 meters, tested in laboratory conditions.

Code Effective against Description
6 Dust tight No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.

Code Protection against Test duration Description
6 Powerful water jets 3 mins from a distance of 3 meters Protection from water projected in powerful jets from a nozzle with a 12.5mm diameter opening in any direction
  • Feature
    1. Much brighter and cooler than normal taillight.
    2. 12 LEDs for stop/ tail lamp.
    3. IP66 dust & waterproof compliant*.
    4. Indicator function. (Need to install two lamps)
    5. Pre-cut plate for round LED tail light.
    6. Chromed finish for rust-resistance.
    7. This simple steel plate has feet any competent garage mechanic can bend with a torch and crescent wrench to fit the contours of his rear fender.
    8. Mounting bracket and nuts included.
  • Material
    Lens: Acrylic
    Reflector, Frame: ABS
    Bracket: Steel
  • Net Weight
    249g
  • Package
    LED tail light x 1, light mounting bracket x 1, Hex nut x 2
  • Color
    Chrome finish
  • Light Source
    Tail/ stop: 12pcs red LED, 12V 0.1W/ 12V 1.7W
    Indicator: 6pcs amber LED, 12V 2.0W
    The turn signal lights are 2.0W instead of 1.2W in mass production.
    (Note: The imprint on unit wasn't revised specifically.)
  • Type
    Tail lamp, (optional)turn signal
  • Certification
    EMI class 3 and IP66 dust & waterproof Compliant*
    ECE, SAE approved.
  • Fitment
    Universal brake light/ indicator for custom project motorcycle, ATV, UTV, etc.
*Protected from dust / Protected against powerful jetting of water.
1. Modification maybe needed during installation.
2. The finish of bracket is not intended to withstand heat and binding. It is merely plated to protect the steel for rust-resistance. After tweaking the bracket to fit your fender, we suggest polishing and chroming, or at least a good coat of spray paint.
3. Mating connectors and the mounting bracket are sold separately.

*Please allow measuring deviation due to manual measurement.

Measurement of LED Round Tail Light/Brake Light with black mounting bracket

There are yet no reviews for this product.

Please log in to write a review. Log in