LED round tail light with black mounting bracket & caps
Description
Sealed LED module with IP66 dust & waterproof compliant.
→ What does IP66 waterproof rating mean? IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx6, the third-highest water resistance rating, means this product can withstand powerful water jets up to 3 mins from a distance of 3 meters, tested in laboratory conditions.
| Code | Effective against | Description |
|---|---|---|
| 6 | Dust tight | No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow. |
| Code | Protection against | Test duration | Description |
|---|---|---|---|
| 6 | Powerful water jets | 3 mins from a distance of 3 meters | Protection from water projected in powerful jets from a nozzle with a 12.5mm diameter opening in any direction |
SPEC
- Feature
- Much brighter and cooler than normal taillight.
- 12 LEDs for stop/ tail lamp.
- IP66 dust & waterproof compliant*.
- Indicator function. (Need to install two lamps)
- Pre-cut plate for round LED tail light.
- Matte black powder coating finish for rust-resistance.
- This simple steel plate has feet any competent garage mechanic can bend with a torch and crescent wrench to fit the contours of his rear fender.
- Mounting bracket and nuts included.
- Extra acorn nuts included.
- Material
Lens: Acrylic
Reflector, Frame: ABS
Bracket: Steel - Net Weight
267g - Package
LED tail light x 1, light mounting bracket x 1, Hex nut x 2, acorn nut x 2
- Color
Matte black - Light Source
Tail/ stop: 12pcs red LED, 12V 0.1W/ 12V 1.7W
Indicator: 6pcs amber LED, 12V 2.0W
The turn signal lights are 2.0W instead of 1.2W in mass production.
(Note: The imprint on unit wasn't revised specifically.) - Type
Tail lamp, (optional)turn signal - Certification
EMI class 3 and IP66 dust & waterproof Compliant*
ECE, SAE approved.
- Fitment
Universal brake light/ indicator for custom project motorcycle, ATV, UTV, etc.
1. Modification maybe needed during installation.
2. The finish of bracket is not intended to withstand heat and binding. It is merely plated to protect the steel for rust-resistance. After tweaking the bracket to fit your fender, we suggest polishing and chroming, or at least a good coat of spray paint.
3. Mating connectors and the mounting bracket are sold separately.
Video
FAQ
Q1: What type of light is this?
A: This is a round LED rear lamp that can function as a tail light, brake light, and turn signal, designed for custom motorcycle, café racer, bobber, ATV, UTV, buggy, and off-road projects.
Q2: Is this sold as a pair or a single unit?
A: This product is sold as a single unit (1 piece).
To use the turn signal function, two lamps are required (left and right).
Q3: What lighting functions does it support?
A: The lamp supports:
- Running / tail light (red LED)
- Brake light (red LED, higher intensity)
- Turn signal (amber LED) (requires two lamps)
Q4: How bright is the light compared to stock lights?
A: Many customers report that it is brighter than stock taillights, with clear color separation and strong visibility for both brake and turn signal functions.
Q5: What LED configuration and power ratings are used?
A:
- Tail / running light: 12 red LEDs, approx. 0.1 W
- Brake light: 12 red LEDs, approx. 1.7 W
- Turn signal: 6 amber LEDs, 2.0 W
Note:
Earlier production units may have incorrect wattage printed on the housing. The actual turn signal power draw is 2.0 W, which is reflected in the current specifications.
Q6: Why is the correct turn signal wattage important?
A: Turn signal wattage affects flasher relay behavior, especially on motorcycles with thermal or CAN-BUS-sensitive systems.
Knowing the correct 2.0 W draw helps avoid fast-flashing or compatibility issues.
Q7: Is this light street legal?
A: The lamp is ECE, SAE, and EMI Class 3 compliant, and rated IP66 dust- and water-resistant.
Final road legality depends on local regulations and installation position.
Q8: Is this a direct plug-and-play replacement?
A: Not always.
Minor wiring or mounting modification may be required, depending on the vehicle and connector type.
Q9: Are mounting brackets included?
A: No. Mounting brackets are not included.
Mating connectors and mounting hardware are sold separately.
Q10: What materials are used?
A:
- Lens: Acrylic
- Reflector: ABS
- Frame: ABS
Designed for durability and outdoor use.
Q11: Is this waterproof?
A: Yes. It is rated IP66, meaning:
- Protected against dust
- Protected against powerful water jets
Q12: What vehicles is this light compatible with?
A: It is a universal rear light for custom projects, including:
- Motorcycles (café racer, bobber, chopper)
- ATVs / UTVs
- Buggies
- Mobility scooters
- Off-road and custom vehicles
Q13: Are there known direct replacement applications?
A: Customers have used this lamp as a rear indicator or brake light on:
- Kymco Maxer EQ40DA
- One Rehab President / Phantom
- Van Os Galaxy II / Galaxy Plus series
- Travelux Discovery Sport mobility scooters
Connector differences may require modification.
Q14: Does it work well for custom builds?
A: Yes. Many users choose this lamp for custom and retrofit projects due to its compact size, brightness, and multi-function design.
Q15: What does the light look like when illuminated?
A: Customers often describe the light output as bright and clean, with a faceted, gem-like appearance around each LED diode.
Q16: What should I check before purchasing?
A: Before purchasing, confirm:
- You will order two units if turn signals are required
- You are prepared for custom wiring or mounting
- Your flasher relay can handle 2.0 W turn signal load
Measurement
*Please allow ±3% measuring deviation due to manual measurement.
There are yet no reviews for this product.
Please log in to write a review. Log in
Related Products
