バイク用LEDテール-/ブレーキランプ 3インチ 丸い 汎用 Oiフラッシュコントロール付き
レンズの材料:アクリル リフレクターとフレームの材料:ABS ストップライト色:レッド ウインカー色:アオレンジ タイプ:テールライト、ウインカー(オプション、ライト二つが必要) 光源: テールライト:レッドのLED12個 12V 0.1W/ 12V 1.7W ウインカー:オレンジのLED6個 12V 2.0W テールライトの電線長さ:145mm/ 5.7 inch Oiフラッシュコントロールの電線長さ:155mm/ 6.1 inch 正味重量:199g パッケージ:LEDテールライト 1個、Oiライトフラッシュコントロール 一個 認証:EMI3級、IP66の防塵と防水認証
*防塵/防水: 強い水に噴射されたの影響を防ぐ。
註: 1.プラグアンドプレイのパーツではありません。ある程度の車両電子知識は必要です。 2.この装置の設計目的はウインカーやブレーキランプの視認性の増強ですが、地域によって、道路法に違反の点滅モードもあります。ご注意ください。 3.OEM TSM/TSSMモジュールを使っている近代のハーレーバイクには不適用です。
- Feature
- Get more attention and visibility from the vehicle behind you in traffic.
- 16 flashing modes that no one else has.
- Much brighter and cooler than a normal taillight.
- 12 LEDs for stop/ tail lamp.
- IP66 dust & waterproof compliant*.
- Indicator function. (Need to install two lamps)
- Oi Flash Controller SPEC
♦ 16 different modes that can be applied to your stop light, turn signal light, hazard light, and decoration light.
♦ Operate in the voltage range from 6.5V to 16V. (Suitable for 12V vehicle power system)
♦ Ambient temperature must not below -20° (-4°F) and not exceed +85° (185°F).
♦ Works both for halogen & LED bulbs.
♦ Super-duper easy set up for LED lights. NO LOAD RESISTOR IS NEEDED.
♦ Maximum current rating up to 8A. (Suitable for up to 4 light bulbs with 21W)Oi Flash Controller is designed to replace a 3-pin flasher relay ONLY (not for a 4 or 5 pin relay, it will destroy the device).
- Material
Lens: Acrylic
Reflector, Frame: ABS - Net Weight
199g - Package
LED tail light x 1, Oi flash controller x 1
- Color
Tail/ stop: red LED
Indicator: amber LED - Shape
Round - Light Source
Tail/ stop: 12pcs red LED, 12V 0.1W/ 12V 1.7W
Indicator: 6pcs amber LED, 12V 2.0W
The turn signal lights are 2.0W instead of 1.2W in mass production.
(Note: The imprint on unit wasn't revised specifically.) - Wire Length
Tail light: 145mm/ 5.7 inch
Oi flash controller: 155mm/ 6.1 inch - Type
Tail lamp, (optional)turn signal - Certification
EMI class 3 and IP66 dust & waterproof Compliant*
ECE, SAE approved.
2. Newer Harley-Davidsons run the "indicator flash rate" through the OEM TSM/TSSM modules. You can not use Oi flash controller if the OEM TSM/TSSM modules include the circuit of your motorcycle.
*Please allow measuring deviation due to manual measurement.
商品レビューはまだありません
レビューを書くためにはログインしてください。 ログイン