二色LED付きバイクミラー ルシファー 黒 Oiフラッシュコントロール付き M10 1.5ピッチ BMWに適用

0 Rating
$214.28
在庫なし
商品番号: 100182019003303
適用範囲 単位
Visualize it right away
Printable 1:1 actual size. Print and compare before purchase.
特色
1.OiフラッシュコントロールとルシファーLEDバイクミラーはカスタムバイクプロジェクトを新たなレベルに連れて行く
2.内蔵二色のLEDライト付き、好きに組み合わせて、ウインカーとドライヴィングとして使えまる
3.IP67認証、防塵と防水の密封LEDモジュール
4.カスタムバイクに似合うスタイリッシュな設計
5.コンベクスレンズで、より広い視野ができる
6.新車輌ミラー保安基準適合品、その上、ヨーロッパ基準のEマーク認証のミラーとLEDライト
7.視認性かなり増強:後ろの車の注意を引く
8.全16種、特別なフラッシュモード
9.適用電圧範囲:6.5V t~ 16V(12Vの車両電源システムに適用)
10.作業環境温度:-20°C (-4°F) ~ +85°C (185°F)
11.定格電流最大値は8Aまで、およそ四つの21Wのライトバルブ
12.LEDライトに非常に簡単の設定、余分なリレーはいりません。

 

取付可能車種:
ミラーボルト径がM10 1.5ピッチのBMWバイクに適合する
 
*一部のBMWモデル(例:F650、F650CS等)
はM8 1.25ピッチボルトで取付なので、スクーター用(M8ボルト付き)のをお選びください。
 
一部のBMWモデル(例:K1200GT、K1200RS、R1100GS、R1100R、R1100RS、R1150GS、R1150R、R1150RS、R1200C等)
はM8ステムでスイッチボックスに貫通して取付なので、ハーレー用(5/16インチボルト付き)のをお選びください。
 
ご注文前に、元のミラーボルトの規格をご確認の程、よろしくお願いいたします。

 

ハウジングの材料:ABSプラスチック
柄の材料:アルミニュム
鏡板の色:黒
LED:
白:二個 (12V / 0.9W);琥珀色:七個 (12V / 0.9W)
ガラス:クロムコンベクスレンズ
ミラーの電線長さ:620mm /24inch
Oiフラッシュコントロールの電線長さ:155mm/ 6.1 inch
重量:n.w.: 810 g./ 1.78 lbs. (一対)、 g.w.: 1335 g/2.94 lbs.(全体な重量、包装を含まれ)
パッケージ:
一対(右側と左側)
Oiライトフラッシュコントロール 2個
ネジ径変換アダプター(10mmネジ→10mm1.5 pitchネジx2)
ボルトキャップ 2個
ケーブルタイ 2個

 

註:
1.プラグアンドプレイのパーツではありません。ある程度の車両電子知識は必要です。
2.純正部品の取外し/取付け、ボルト/ナットの締め付けについては各メーカーのサービルマニュアルに基づいて、確実に作業をしてください。
3.製造及び品質には万全を期しておりますが、万が一商品に不備があった場合は、取付けの作業をしないて下さい。
4.不具合が発生した場合、使用を中止してください。
5.この装置の設計目的はウインカーやブレーキランプの視認性の増強ですが、地域によって、道路法に違反の点滅モードもあります。ご注意ください。
6.取り付けのために、改造は必要の可能性はあります。
7.以上の説明が守られていない場合、商品への保証はいたしませんのでご注意ください。
8.OEM TSM/TSSMモジュールを使っている近代のハーレーバイクには不適用です。
9.純正ウインカーを取り外して、本製品を単独で使用した場合、車検への適合は保証できませんのでご了承ください。

Sealed LED module with IP67 dust & waterproof compliant.

→ What does IP67 waterproof rating mean?

IP67: Ingress protection, Solid particle protection, Liquid ingress protection

IP6x is the highest dust resistance rating, so this product is fully protected against dust.
IPx7, the second-highest water resistance rating, means this product can withstand immersion in water up to one meter (3.3 feet) for 30 minutes, tested in laboratory conditions.

Code Effective against Description
6 Dust tight No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.

Code Protection against Test duration Description
7 Immersion, up to 1 m depth 30 mins Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins
Lucifer LED Motorcycle mirror turn signal, driving light, in the daylight, at night, in total darkness
  • Features
    1. Oi flash controller with Lucifer LED mirrors completes your custom motorcycle project to a full A+ grade.
    2. Two-tone color LED lights, various combinations of driving and indicator lights set up.
    3. Waterproof and dustproof LED modules.
    4. Stylish designs for your custom applications.
    5. Wider vision with convex lens and E-mark approved.
    6. *Sealed LED module with IP67 dust & waterproof Compliant.
  • Oi Flash Controller SPEC
    ♦ 16 different modes that can be applied to your stop light, turn signal light, hazard light, and decoration light.
    ♦ Operate in the voltage range from 6.5V to 16V. (Suitable for 12V vehicle power system)
    ♦ Ambient temperature must not below -20° (-4°F) and not exceed +85° (185°F).
    ♦ Works both for​ halogen ​& LED bulbs.
    ♦ Super-duper easy set up for LED lights. NO LOAD RESISTOR IS NEEDED.
    ♦ Maximum current rating up to 8A. (Suitable for up to 4 light bulbs with 21W)
  • Material
    Mirror Housing: ABS plastic
    Mirror Stem: Aluminum
  • Shape
    Diamond
  • Glass
    Chrome convex lens
  • Mirror Wire Length
    620mm / 24inch
  • Color
    Mirror plate: Matte black
    LED: White: 2 PCS (12V / 0.9W), Amber: 7 PCS (12V / 0.9W)
  • Adjustment
    Fairly adjustable
  • Weight
    n.w.: 810 g./ 1.78 lbs. (pair),
    g.w.: 1335 g./ 2.94 lbs. (total package, packing inclusive)
  • Package
    a pair ( Left hand / Right hand ),
    Oi flash controller x 2 pcs,
    10mm standard thread bolt x 2 PCS,
    10mm reverse thread bolt x 1 PC,
    8mm standard thread bolt x 2 PCS,
    8mm reverse thread bolt x 1 PC,
    10mm 1.25 pitch to 10mm 1.5 pitch adapter x 2 PCS,
    bolt cap x 2, cable tie x 2
  • Compatibility
    Compatible for most BMW motorcycles*
    *For F650, F650CS, etc... the correct bolt size is M8 1.25pitch, please check "8mm for scooter" instead.
    *For R18, K1200GT, K1200RS, R1100GS, R1100R, R1100RS, R1150GS, R1150R, R1150RS, R1200C, etc... use an 8mm stem going through the switch box. Please check the fitment for "most Harley-Davidson" using the same way application.

    ATTENTION!Oi Flash Controller is designed to replace a 3-pin flasher relay ONLY (not for a 4 or 5 pin relay, it will destroy the device).

    BMW
  • Connect to the Turn Signal

    ♦ There is no need to replace the relay when using this product with exisiting blinkers.
    ♦ Relay is needed when using this product as the only turn signal.
    ♦ Minor modification might be required depending on motorcycles.

    Check the wiring of the vehicle on the manufacturer service manual, and connect the turn signal wiring with the attached electro tap.
    Also, please wire the position line (white) of this product to the accessory power supply of each vehicle.

    In order to use this product safely please understand and work on the followings:
  1. These are not plug & play parts, motorcycle electrical knowledge is required.
  2. For removal / installation of genuine parts and tightening of bolts / nuts, please be sure to perform based on the manufacturer's issued service manual.
  3. We are making every effort to manufacture and making sure its quality, but please do not install if there is any incompleteness in the item if any.
  4. Please stop using it immediately if any faults happen.
  5. Although this device has been designed to significantly increase your lighting visibility, flash/strobe patterns may not be street legal in your area.
  6. *Protected from dust / Protected against the effects of immersion in water to depth between 15cm and 1 meter.
  7. Minor modification might be required.
  8. Warranty is voided if any of the above are not followed.
  9. Newer Harley-Davidsons run the "indicator flash rate" through the OEM TSM/TSSM modules. You can not use Oi flash controller if the OEM TSM/TSSM modules include the circuit of your motorcycle.
KiWAV, kiwavMirror, kiwavmotor, motorcycle, Oi flash controller, Lucifer, LuciferLED, LED, 10mm15 naked, black, 10MM15/div>

*Please allow measuring deviation due to manual measurement.

Measurement of Lucifer with new generation light Oi flash controller

商品レビューはまだありません

レビューを書くためにはログインしてください。 ログイン