This guide covers the installation of Magazi motorcycle fog light mounting brackets.
Quick answer: Position the mounting bracket at the intended mounting point, loosely assemble the hardware, set the bracket and fog light to the desired position, then secure the hardware after confirming clearance and alignment.
The exact mounting position and hardware arrangement may vary depending on the motorcycle and the fog light setup.
- Details
- Written by: KiWAV
This guide covers the installation of KiWAV Classic square bar-end mirrors on motorcycles with compatible handlebar-end mounting.
Quick answer: Remove the existing handlebar end cap and any bar-end weight that prevents access to the handlebar opening, insert the supplied bar-end mounting system, secure the mirror, then adjust the distinctive square mirror head to the desired viewing position.
- Details
- Written by: KiWAV
The KiWAV 65N is a compact 2.5-inch round motorcycle bar-end mirror with a CNC-machined aluminum body and a 320R convex mirror lens. Its more strongly curved convex surface provides a wider field of view from a relatively small mirror head.
This guide covers the installation of KiWAV 65N bar-end mirrors. Because the 65N series is available with different mounting hardware for different handlebar configurations, always use the mounting kit specified for your motorcycle or handlebar setup.
- Details
- Written by: KiWAV
This guide covers the installation of KiWAV 65N round bar-end mirrors on Harley-Davidson motorcycles with compatible hollow handlebars.
Will the 65N fit a 1-inch Harley handlebar? The hollow-bar version of the 65N is designed for 7/8-inch or 1-inch open-ended handlebars with a threadless internal diameter of approximately 13–21 mm.
The outside diameter of the handlebar alone does not determine fitment. Before installation, make sure the bar end is open, the inside is hollow and threadless, and the internal diameter is compatible with the supplied expansion mount.
- Details
- Written by: KiWAV
Page 3 of 3
