バーエンドミラー マンバ ツヤ消し仕上げカーボンファイバー ヘビーウェイト 1、1-1/4インチ中空式ハンドル用
Please identify and choose the suitable mounting hardware for your bike. Contact us if you are not certain.
1.ファンシーな装飾でバイクの印象を変える ― 高品質のアルミと最新技術のカーボンファイバー(炭素繊維)で製作されるバイクミラー
2.普通のカーボンファイバー(炭素繊維)ではない:
・一般のカーボンファイバーはエポキシ樹脂を使用ですが、こちらはポリカーボネート使用のCFRTPで製作される
・優秀な耐衝撃性 ― 2層の3K平織のカーボンファイバー(最上層と最低層)を使い、真ん中の層はポリカーボネートとガラス繊維強化樹脂であり
・環境にやさしい ― 再生利用と再利用できる
・紫外線抵抗性ありの塗り
3.軽くけど強い ― 完全アルミ製のミラーより40%ほど軽い
4.信じられない薄さ ― 一番薄いところはおよそ4.8mmのみで、バイクにキレイな外見
5.コンベックスレンズで、より広い視野ができるの上、ヨーロッパ基準のE-mark認証も取っておる
材料:
ハウジング ― カーボンファイバー(炭素繊維)とアルミニュム
柄 ― アルミニュム
ガラス ― クロムコンベクスレンズ
色:ツヤ消し仕上げカーボンとマットブラック
調整:一つの調整ジョイント
重量:n.w.: 715 g./ 1.57 lbs. (一対), g.w.: 940 g./ 2.07 lbs. (包装含まれ)
パッケージ:
ミラー 一対(右側と左側)
17、20mm取付部品(中空側) 2個
17、20mm取付部品(ネジ穴側) 2個
M6ボルト 2本
取付可能車種:
外径1インチや1-1/4インチの中空式ハンドル付きモデル
17mm取付部品は内径17.5mm-20.4mmm対応
20mm取付部品は内径20.5mm-24.9mmm対応
*内径が対応範囲以外の場合、ご注文前に、お問い合わせください。
註:7/8インチの中空式ハンドルや、ネジ式ハンドルの場合、サイズで適合うセットを選んでください。(元のバーエンドプラグを取り外すと、ハンドルの種類の確認ができます。)
註:
1.電子制御式スロットル(ETC)付きモデルには取り付けできません。
2.詰まっているハンドルは孔をあけ必要があります。
3.改造必要の可能性があります。
4.グリップの接触を避けるために、座金を用意して、スペーサーとして使うのは勧めます。(スペーサーは含まれていません。)
5.7/8インチの中空式ハンドルや、ネジ式ハンドルの場合、サイズで適合うセットを選んでください。
(元のバーエンドプラグを取り外すと、ハンドルの種類の確認ができます。)
How to install this bar end mirrors on your motorcycle
- Features
- A fancy detail that makes your motorcycle different—combining high quality aluminum and latest technology carbon fiber composite.
- Not the usual carbon fiber:
- Unlike conventional CFRPs that uses epoxy resin, Mamba is special blend Carbon Fiber Reinforced Thermoplastic (CFRTP) that uses Polycarbonate (a thermoplastic) instead.
- Excellent impact toughness-- 2 layers of (top and bottom) 3K plain weave carbon fiber, with a mid-layer reinforced glass fiber impregnated through-and-through with Polycarbonate.
- Environmental friendly, can be recycled and reused.
- UV resistant coating.
- Extra strength with reduced weight (about 40% less weight than other full aluminum made mirrors).
- Unbelievable thin. Gives a tidy, neat, and clean look. The thinnest point is around 4.8mm depending on models.
- E-mark approved with a wider clear rear-view convex chrome lens.
- Material
Mirror Housing: Real carbon fiber and machined aluminum
Mirror Stem: Aluminum - Glass
Chrome convex lens - Weight
n.w.: 715 g/ 1.57 lbs. (pair),
g.w.: 940 g/ 2.07 lbs. (total package, packing inclusive)
- Color
Matte carbon and matte black - Adjustment
Fairly adjustable (one adjusting joint) - Package
A pair of mirrors (left hand / right hand),
17, 20mm expansion components-hollow side x 2,
17, 20mm expansion components-threaded side x 2,
M6 bolt x 2
- Compatibility
It ONLY works on outer diameter 1" and 1-1/4" hollow-ended handlebars with internal diameter (ID):
The 17mm expansion components set is for ID of 17.5mm to 20.4mm,
and the 20mm expansion components set is for ID of 20.5mm to 24.9mm.
If the ID of your bar does not fall in the range above, please contact us before purchase.
*For 7/8" hollow ended handlebars or threaded inside the bar end, please find the suitable set in our store, or leave the model and year of the motorcycle as notes before finishing your order.
2. Some bikes with solid bar need to drill and tap. Modification might be needed.
3. For 7/8" hollow ended handlebars or threaded inside the bar end, please find the suitable set in our store, or leave the model and year of the motorcycle as notes before finishing your order.
4. Might need to apply some washers as spacer to avoid contact with grips. (spacers are not included.)
*Please allow ±3% measuring deviation due to manual measurement.
商品レビューはまだありません
レビューを書くためにはログインしてください。 ログイン